Ester plasticizers are typically monomerics, but those designated as Plasthall P-Series are polymerics. Hallstar has a broad product portfolio with a wide range of functionality in both elastomers and PVC. A subset of this brand is our Plasthall PR-Series which represents the group of products designed as Phthalate Replacements.
Plasthall 100 is the monoester isooctyl tallate. It has excellent compatiblity in polychloroprene as well as chlorosulfonated polyethylene and natural rubber. In polychloroprene Plasthall 100 offers good transmission fluid and water resistance and very good low temperature performance.
Plasthall® 190 is an ultra-stable, non-phthalate plasticizer, designed to enhance the performance of your adhesive, sealant and coating formulations. Plasthall® 190 is an efficient plasticizer that will reduce viscosity and provide extremely low temperature performance. It is typically used in cross-linked systems like PU, SMP, Epoxy-Polyol, Urethane-Acrylate and does not impact physicals after aging or weathering
Plasthall 4141 is a monomeric plasticizer that exhibits extremely good compatibility with practically all types of synthetic rubber offering low volatility with high efficiency and low temperature properties.
Plasthall 7071 is an ester plasticizer for high polarity elastomers and plastics. This plasticizer acts as a nucleating agent and lowers the Tg of the plastic to allow for faster and lower temperature processing.
Plasthall DBS provides excellent compatibility in a wide range of plastics and synthetic rubber. It offers superior low temperature performance and oil resistance. Plasthall DBS is used in the food packaging industry. It can also be used as a desensitizer for torpedo propellant.
Plasthall DIDP is used where general performance applications require a higher degree of permanence greater than would be obtained by using DOP. Advantages are seen in its permanence in polar fluids and volatility resistance.
Plasthall DIDS is diisodecyl sebacate. It is a useful plasticizer for PVC NBR and other vinyl copolymers. Plasthall DIDS offers good low temperature properties and improved permanence for a monomeric ester.
Plasthall DOP is an economical general performance monomeric ester. DOP provides a balance of properties and economical cost that combine to make DOP the standard by which all other plasticizers are compared.
Plasthall P-550 is a medium molecular weight low viscosity polymeric plasticizer which has very low volatility while imparting low hardness. P-550 provides excellent processability efficiency and compatibility in a variety of thermoplastic and thermosetting resins.
Plasthall P-622 has been specifically designed as a plasticizer for remoistenable seal gum adhesives. P-622 provides both excellent humectant and moisture response properties in the adhesive film as well as rapid emulsification in the adhesive formulation.
Plasthall P-643 is a low to medium molecular weight polyester plasticizer. It is well suited for applications requiring FDA acceptance. Plasthall P-643 has extraction and migration resistance superior to typical monomeric plasticizers especially where stress cracking resistance is important.
Plasthall P-650 is a low to medium molecular weight polyester adipate. It offers excellent migration resistance when compared to similiar molecular weight materials while still giving good low temperature performance.
Plasthall P-670 is a low molecular weight polyester which has a solid performance history in flexible PVC. P-670 is noted for its excellent efficiency processing characteristics and low temperature properties. P-670 is a good general purpose plasticizer.
Plasthall P-7046 is an intermediate molecular weight polyester offering a good balance of low volatility resistance to extraction by organic fluids and a low tendency to migrate to polystyrene and ABS substrates.
Plasthall P-900 has been shown to provide a superior hydrophilic surface. Compounds containing P-900 are excellent candidates for water side print roll applications. Plasthall P-900 is also effective in plasticizing copolymer emulsions used in adhesive formulating.
Plasthall PR-A217 is a very low viscosity, biodegradable, polymeric plasticizer offering good permanence and ease of processing. The material exhibits exceptionally low cold flex termperatures and softening power.
SUPRMIX Plasthall 226(DBEEA) is a compound consisting of 72% Plasthall 226 and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
SUPRMIX Plasthall DBP is acompound consisting of 72% Plasthall DBP and 28% carrier. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredients to function in the same manner as it would had been incorporated as a neat material.
Suprmix® PlastHall® DBS a free-flowing powder by using our amorphous silica carrier, weighing, delivery, and incorporation headaches are minimized. Suprmix® PlastHall® DBS is so efficiently incorporated during the mixing steps that often the PHR (Parts per Hundred Rubber) level can be reduced while the same physicals and durometer hardness are retained
SUPRMIX Plasthall DIDP is a compound consisting of 72% Plasthall DIDP and 28% substrate. SUPRMIXes permit liquids to be handles as powders. As SUPRMIX is incorporated into a rubber compound the active ingredient is released from its carrier allowing the active ingredient to function in the same manner as it would if it had been incorporated as a neat material.
SUPRMIX Plasthall DOP is the best in dispersion and ease of incorporation. Mill operators have no worry about splattering or having liquid fall into the mill pan or on floor with SUPMIX Plasthall DOP. If used in mill mixing, it doesn’t tend to tear up the bands as most liquids tend to do.
SUPRMIX Plasthall P-550 is a medium molecular weight polyester glutarate dispersed on an amorphous silica carrier. SUPRMIX Plasthall P-550 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds.
SUPRMIX Plasthall P-7046 is an intermediate molecular weight polyester glutarate dispersed on an amorphous silica carrier. SUPRMIX Plasthall P-7046 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds.
SUPRMIX Plasthall P-7092 is an intermediate molecular weight polyester glutarate dispersed on an amorphous silica carrier. SUPRMIX Plasthall P-7092 provides a free flowing easy to handle powder that incorporates quickly into rubber compounds.